2007-2017年中国沙尘气溶胶的三维分布特征及输送过程

利用最新发布的CALIPSO产品，构建了2007-2017年中国沙尘气溶胶的三维分布，并结合HYSPLIT-4模式和再分析数据，探讨了沙尘的三维输送过程。结果表明：中国的沙尘排放源区主要是塔克拉玛干沙漠和巴丹吉林沙漠，沙尘气溶胶出现频率分别为60%和35%。塔克拉玛干沙漠排放的沙尘主要（50%~70%）停留在源地0~6 000 m高度，少部分向东输送至甘肃和内蒙古；巴丹吉林沙漠排放的沙尘则主要向东输送。中国沙尘排放量在春季最大，向东输送最强；夏季，东亚夏季风限制了沙尘向东输送；秋季，沙尘排放减弱，输送强度和夏季相当；沙尘排放量在冬季最小，输送最弱。夏季，沙尘在输送过程中可被抬升至高度5 000 m以上，春季次之，秋、冬季的沙尘主要在低层大气输送。沙尘在向东输送的过程中被抬升并和当地人为污染物混合变为污染性沙尘，华北地区污染性沙尘出现频率高达30%；输送到海洋的沙尘也会与洋面上（0~3 000 m高度）的海盐气溶胶混合，出现频率约为10%。     

规则池塘群的复杂直线模式识别

针对现有面要素直线模式识别方法难以解决规则池塘中破碎区域的问题,提出了一种规则池塘群的复杂直线模式识别方法。首先,分析了规则池塘群的空间特征和认知特点,提出了“主次关系→并列关系→直线模式→复杂直线模式”的多层次认知顺序;其次,设计了主次关系池塘组、并列关系池塘组、直线模式池塘群的识别方法;最后,构建了复杂直线模式池塘群的识别模型。试验表明:本文方法能够消除破碎区域对规则池塘群直线模式提取的不利影响,有效提升复杂直线模式识别的质量。     

广州城市流浪乞讨者的空间管治与日常生活实践

以广州流浪乞讨者为研究对象,通过深度访谈等质性研究方法,解读针对流浪乞讨者的空间管治政策与手段,分析流浪乞讨者的日常生活实践与生境协商。研究发现：在地方城市政策对流动性与公共秩序限制的双重压力下,在流浪乞讨者的日常生活实践中,不仅有针对管治行动者而刻意为之的特殊营建,亦有基于程式化生活流程对自我身份认同的重塑与真情实感的展演。地方政府基于空间目标的救助与真实存在的日常生活实践存在着一种张力。研究关注了城市边缘群体日常生活对地理意义的主动塑造过程,对全面理解并规范管理中国城市流浪乞讨现象具有借鉴意义。     

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

Directional interpolation infinite element for dynamic problems in saturated porous media

In this study, a directional interpolation infinite element suited to a saturated porous medium is presented to account for dynamic problems with semi-infi     

长江经济带城市土地利用效率的影响因素及其空间溢出效应研究

在人多地少的基本国情下,提高城市土地利用效率是促进区域可持续发展和建设生态文明的内在要求。本文在对2009-2016年长江经济带108个地级及以上城市土地利用效率的研究基础上,采用空间相关性研究方法分析了时空分布格局,通过构建空间杜宾模型(SDM)对其空间溢出效应进行分析。研究结果表明:1)2009-2016年长江经济带城市土地利用效率整体呈现稳定上升趋势;基本呈现以上海、南京、武汉等不同城市群中心城市向外逐步降低的“中心-外围”的分布格局。2)通过构建空间杜宾模型分析发现,经济发展水平、产业结构有显著为正的直接效应和溢出效应;土地市场化水平有显著为正的溢出效应;城市固定资产投资对城市土地利用效率具有正的直接效应和负的溢出效应;政府财政支出水平则对城市土地利用效率的直接效应和溢出效应均不明显。3)不同影响因素对经济带上中下游城市土地利用效率的空间效应存在一定差异性。     

生态地理学概念界定及其经典案例分析

对生态地理学的概念进行了详细讨论和辨析,并将它与相近学科如生物地理学、生态地理区划、宏生态学等进行了比较分析,界定了生态地理学的概念。研究认为：生态地理学是生态学和地理学的交叉学科,是研究生态系统各组分关系和生态过程的地理空间分布格局或/和时间演变规律及其与地理环境耦合机制的学科。生态地理学的目的是揭示不同环境梯度下或不同时间尺度上生态系统各组分关系和生态过程的普适性规律及其成因。同时,结合国内外野外实验平台介绍,在全球变化等研究领域列举了经典案例进行分析：① 全球不同气候带森林凋落物分解和碳汇功能的研究;② 中国不同陆地生态系统碳通量和碳汇功能研究;③ 中国东北样带和南北样带陆地生态系统的脆弱性与适应性研究;④ 中国北方草地样带尺度的生态系统生态学研究。主要目的是在辨析生态地理学概念的基础上指出未来发展方向,推动生态地理学的发展。     

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

紫外-可见分光光度法测定多花黄精多糖含量

目的：测定湖南洪江国家黄精标准化基地多花黄精中的多糖含量，为多花黄精的进一步开发利用及药材质量标准研究奠定基础。方法：以葡萄糖为标准品，采用硫酸-蒽酮试剂显色，应用紫外-可见分光光度法测定多花黄精多糖含量。结果：葡萄糖在3.28～19.68μg/mL范围内线性良好（r=0.9992），多花黄精多糖平均含量为8.05%。结论：洪江种植基地的多花黄精品质优良，洪江是道地黄精药材种植理想基地。